All postsSizes & Design

EDDM Indicia: Exact Wording, Placement and Size Rules

The EDDM Retail indicia wording, where it goes on the address side, its minimum size and type, and how it differs from a BMEU permit indicia.

EDDM Indicia: Exact Wording, Placement and Size Rules
On this page
  1. The exact EDDM Retail indicia wording
  2. EDDM indicia placement on the address side
  3. Minimum size and typography
  4. The "Postal Customer" address line
  5. EDDM Retail indicia vs the BMEU permit indicia
  6. How EDDM2GO handles the indicia
  7. EDDM indicia FAQ

The EDDM indicia is the printed box that replaces a stamp. For EDDM Retail it reads PRSRT STD, ECRWSS, U.S. POSTAGE PAID, EDDM RETAIL. It sits above and to the right of the address, within 1.625 inches of the right edge and 1.375 inches of the top, larger than 0.5 by 0.5 inch, in capitals of at least 4 point.

Those numbers come straight from the USPS Every Door Direct Mail page. Below is each rule in plain English, the address line that goes with it, how the Retail indicia differs from the permit indicia used for EDDM BMEU mailings, and what we handle for you on each service.

The exact EDDM Retail indicia wording

USPS publishes an approved example of the EDDM Retail indicia in its EDDM Retail fact sheet and as a ready-made indicia image. It is four lines inside a box:

  • PRSRT STD
  • ECRWSS
  • U.S. POSTAGE PAID
  • EDDM RETAIL

Copy that wording exactly. Don't add a permit number, a city or a date. EDDM Retail is paid at the Post Office counter and needs no mailing permit, so there is no permit number to show. The USPS rules for Retail postage payment sit in DMM 144, section 1.3, which says an indicia must be on each piece, printed above and to the right of the simplified address.

Rule of thumb: if your indicia has anything on it besides those four lines, it is not the EDDM Retail indicia. Start again from the USPS image or one of our templates.

EDDM indicia placement on the address side

The indicia lives on the mailing side of the piece, in the upper right corner. USPS sets three placement rules:

  1. Above and to the right of the address block. The "Postal Customer" line sits below and to the left of the box.
  2. Inside the corner area. The box should fit within 1.625 inches from the right edge and 1.375 inches from the top edge.
  3. Clear space. Leave 1/8 inch of space around the top and right edges of the box, with no artwork, photos or background color crowding it.

Which edge is the "top"? For a flat, it's the edge that is up when the address reads normally. On a 6.5 x 9 postcard printed landscape, that's one of the long edges. Keep the address side reading the same direction as the indicia so the carrier sees both at a glance.

A common problem is a background photo running under the corner. The indicia might still be legible, but the clear space is gone. Leave that corner white or a flat light color.

Minimum size and typography

USPS says the EDDM Retail indicia has no specific size requirement, but it must be larger than 0.5 inch by 0.5 inch. The type must be in all caps and at least 4 point.

In practice, 4 point is tiny. It's the legal floor, not a good target. A box around 0.75 to 1 inch wide with 6 to 8 point type reads easily and still fits well inside the 1.625 by 1.375 inch corner area. Use a plain sans serif typeface and a thin black border. Avoid script fonts, outlined type and light gray text.

RuleUSPS requirement
WordingPRSRT STD / ECRWSS / U.S. POSTAGE PAID / EDDM RETAIL
PositionAbove and to the right of the address block
Corner areaWithin 1.625" from the right edge and 1.375" from the top edge
Clear space1/8" around the top and right edges
Minimum sizeLarger than 0.5" x 0.5"
TypeAll caps, at least 4 point

Source: USPS Every Door Direct Mail. Our EDDM sizes guide shows the same rules next to every size we print.

The "Postal Customer" address line

EDDM pieces carry no names or street addresses. USPS says pieces are addressed to "Postal Customer" and delivered to every address on the routes you pick. The USPS fact sheet shows the approved EDDM format as "Local Postal Customer."

Both are correct. The simplified address rules in DMM 602, section 3.2 make "Postal Customer" the required wording and let mailers use "Local" in place of the Post Office and state name. The same section allows "Residential Customer" for residential deliveries on city routes, and it rules out made-up designations such as "Food Buyer." Our templates use "Local Postal Customer."

Put the address line below and to the left of the indicia, in a clear area of the mailing side, in type at least as large as the indicia text.

EDDM Retail indicia vs the BMEU permit indicia

USPS offers EDDM two ways. With EDDM Retail you pay at the Post Office counter, with no permit, at the Retail rate of $0.26 a piece for flats at the time of writing. With EDDM BMEU you mail through a Business Mail Entry Unit and pay with a bulk mailing permit. Both are described on the USPS EDDM page.

The indicia follows the payment method. A BMEU mailing carries a permit imprint instead of the Retail box. Under DMM 604, section 5.3, a USPS Marketing Mail permit imprint shows the price marking, "U.S. Postage Paid," the city and state, and the permit number (a company permit can show the permit holder's exact name in place of the city, state and number). It must read in the same direction as the address, cannot sit below it, and the preferred spot is the upper right corner.

EDDM RetailEDDM BMEU
PaidAt the Post Office counterWith a bulk mailing permit
IndiciaEDDM RETAIL box, no permit numberPermit imprint with permit number or company name
Address line"Postal Customer" or "Local Postal Customer"Simplified address under DMM 602

Never print both on one piece, and never print a permit you don't hold. The indicia has to match how the mailing is actually paid.

How EDDM2GO handles the indicia

You don't have to build any of this from scratch.

  • Print Only. On EDDM Print Only orders we place the EDDM Retail indicia and the "Local Postal Customer" line in the right spot on the mailing side. We ship the printed pieces to you, and you take them to the Post Office and pay the Retail postage there.
  • Full Service. On EDDM Full Service orders the pieces carry the permit indicia for the mailing we prepare, bundle and hand to USPS. Postage shows as its own line in your price, priced from the USPS rate plus a 3% card processing charge. You don't print the Retail box at all.
  • Templates. Our free EDDM templates mark the indicia area, bleed, trim and safe zone for every size, so your design leaves that corner clear.
  • File check. The free EDDM file checker reviews your file against size, bleed and safe-zone rules before you order, and a person reviews every paid order before it prints.

If you're designing your own file, start from a template, keep the top-right corner of the mailing side clear, and let us place the indicia for the service you choose.

EDDM indicia FAQ

Can I design my own EDDM indicia?

Yes, as long as it has the exact four lines of wording, sits above and to the right of the address, is larger than 0.5 by 0.5 inch and uses capitals of at least 4 point. Copying the USPS indicia image is the safest way to get it right.

Do I need a permit number on an EDDM piece?

Not for EDDM Retail. Retail postage is paid at the counter and USPS says no mailing permit is needed. A permit number only appears on permit imprint mail, such as EDDM BMEU mailings.

Is it "Postal Customer" or "Local Postal Customer"?

Either works. USPS uses "Postal Customer" on its EDDM page and "Local Postal Customer" in its EDDM Retail fact sheet, and DMM 602 lets "Local" stand in for the Post Office and state name.

What happens if the indicia is wrong?

Fixing it after printing means reprinting, so it pays to get it right in the file. That's why we place the indicia for you on every order and a person checks each file before it prints.

Ready to design? Download a free EDDM template for your size, then order through EDDM Print Only or call us at (346) 306-EDDM (3336).

View all posts